Сообщества

A lesson in Combi-Style Manicure with Gel Nail Strengthening and Coating Under Cuticles using Gel Paints. Nail Plate Alignment using MonoPhase Gel ↓ ↓ ↓More info↓ ↓ ↓
Instagram 👉https://www.instagram.com/emiroshnichenko/

Как выполнить коррекцию гель-лака на своих руках? Екатерина Мирошниченко делает коррекцию с камуфляжной базой гель-лака и красивый дизайн ногтей с мрамором, слайдерами Naildress и фактурой рептилии↓ ↓ ↓Подробнее↓ ↓ ↓ Заказать продукцию 👉
https://clck.ru/DDsvj
Instagram Екатерины Мирошниченко 👉https://www.instagram.com/emiroshnichenko/
Заказ продукции 👉What's app www.whatsap.me/emi_official

Самый модный дизайн ногтей 2018: геометрия,  эффект бирюзы по мокрому гель-лаку, быстрые дизайны с Charmicon и Naildress Продолжение обзора новинок от E.Mi и пошаговые мастер-классы по дизайну ногтей. Откройте↓ ↓ ↓ Получить тейбл-тенты в подарок 👉https://clck.ru/DBn73
Instagram Екатерины Мирошниченко 👉https://www.instagram.com/emiroshnichenko/
Заказ продукции 👉What's app www.whatsap.me/emi_official

Делаем модный маникюр 2018 - дизайн ногтей мрамор! Екатерина Мирошниченко показывает, как сделать стильный маникюр с эффектом натурального камня на ногтях.  ↓Откройте↓ ↓Получить тейбл-тенты в подарок 👉 https://vk-cc.com/mj4dW
Instagram Екатерины Мирошниченко 👉https://www.instagram.com/emiroshnichenko/
Заказ продукции 👉What's app www.whatsap.me/emi_official
E.Mi в telegram 👉 https://t.me/emi_official_world

In this video we are showing the nail extension on the client's finger nails. We extend the nails using Monophase LED Gel and make Geometry design. ↓ ↓ ↓Read more↓ ↓ ↓ Nail extension for short nails using nail forms and transparent Monophase LED Gel allows to make a creatively-different transparent nail-design.

Trendy manicure 2018 – light clouds on the light blue. Watch our spring master-class!

Рисуем девушку на ногтях от руки! 
 ↓ ↓ ↓Заказ продукции↓ ↓ ↓
https://goo.gl/yLEiaF

Создаем модный эффект baby boomer.
 ↓ ↓ ↓Подробнее↓ ↓ ↓
Заказ продукции https://goo.gl/XPzZPf

Украшаем французский маникюр красной розой. 
↓ ↓ ↓Подробнее↓ ↓ ↓
Заказ продукции E.Mi https://goo.gl/KWEPZk

1. Prepare the nail plate. Cover with E.MiLac Base Gel in 1–2 layers. LED+CCFL lamp — 30 sec, UV lamp — 2 min.
2. Coat with E.MiLac #087 Streetstyle. Only LED or LED+CCFL lamp — — 1-2 min. 
3. Glue Charmicon Lunula #30, #25. 
4. Draw a geometry using E.MiLac Whisper White, the gel paints Alpine Snow and Black Tulip LED/CCFL lamp – 30 sec, UV lamp – 2 min.
5. Apply E.MiLac Top Gel Tackless. LED+CCFL lamp — 2 min, UV lamp — 3-4 min.
6. Place the nail studs on the E.MiLac Sculpt-Maxi BASE GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Fix them using E.MiLac TOP GEL TACKLESS. LED+CCFL lamp – 30 sec, UV lamp – 2 min.

Французский маникюр с E.Mi-цветком на своих ручках. Красивый дизайн ногтей весна 2018.  
↓ ↓ ↓ Больше ↓ ↓ ↓ 
Все, что нужно для классных дизайнов, легко найти по ссылке
https://goo.gl/Bh5R7t

↓ ↓ ↓ Full description↓ ↓ ↓ 
1. Prepare the nail plate. Cover with E.MiLac BASE GEL in 1–2 layers. LED+CCFL lamp — 30 sec, UV lamp — 2 min.
2. Coat with E.MiLac #001 White Lotus. LED+CCFL lamp — 30 sec, UV lamp — 2 min.
3. Cover with E.MiLac Slider Top Gel. LED+CCFL lamp — 30 sec, UV lamp — 2 min.
4. Cut out the element of the Naildress Norwegian Pattern, douse it for a few seconds, remove from the paper base, and glue. Smooth. Apply ULTRABOND to dissolve the slider's residues.
5. Glue Charmicon Jewelry #4. Apply Slider Top Gel. CCFL/LED lamp 30-40 sec, UV lamp– 2 min.
6. Apply E.MiLac TOP GEL Tackless. LED+CCFL lamp — 2 min, UV lamp – 2 min.
7. Use EMPASTA Cranberry Red to fill in the heart and bow inside the Charmicon sticker. LED+CCFL lamp — 2 min, UV lamp – 2 min.
8. Use Gemty Gel Tourmaline to add volume to the heart and bow. LED (45W) or LED+CCFL lamp – 2-3 min.
9. Use the gel Liquid Stones to lay out the volume on top of Naildress. LED+CCFL lamp — 30 sec, UV lamp — 2 min. Degrease with Eurocleanser Lux. Cover with E.MiLac TOP GEL Tackless. LED+CCFL lamp — 2 min, UV lamp– 2 min.
10. Use Gemty Gel Pearl to form the beads. LED (45W) or LED+CCFL lamp – 2-3 min. Cover with TEXTONE Silver, air dry. Apply E.MiLac Top Gel Tackless on the beads. LED+CCFL lamp — 2 min, UV lamp — 3-4 min.

↓ ↓ ↓ Full description ↓ ↓ ↓
1. Prepare the nail plate. Cover with the E.MiLac BASE GEL in 1–2 layers. LED+CCFL lamp — 30 sec, UV lamp — 2 min.
2. Create the coating using the gel paint Black Tulip. LED/CCFL lamp — 30 sec, UV lamp — 2 min.
3. Imprint the fragments of the PRINCOT Gzhel, Foil matte Light Blue, White. On the empty fragments, imrpint the Foil glossy Silver.
4. Cover with the E.MiLac Slider Top Gel. LED+CCFL lamp — 30 sec, UV lamp — 2 min. Apply the E.MiLac Top Gel Tackless. LED+CCFL lamp — 2 min, UV lamp — 3-4 min.
5. Using EMPASTA White Rafinad, draw swirls. Recommended to perfrom this nail design with an intermediate drying. LED+CCFL lamp — 2 min, UV lamp — 3-4 min.

What manicure will be in fashion in 2018?
The long nails, negative space and the latest fashion design with insects will impress the ladies who love to experiment with nail designs.
↓ ↓ ↓Full description↓ ↓ ↓
What manicure will be in fashion in 2018?
The long nails, negative space and the latest fashion design with insects will impress the ladies who love to experiment with nail designs.

1. Prepare the nail plate. Cover with the E.MiLac BASE GEL in 1–2 layers. LED+CCFL lamp — 30 sec, UV lamp — 2 min. 
2. Coat with E.MiLac #099 Morning Sky. LED+CCFL lamp — 30 sec, UV lamp — 2 min.
3. Take the Brush Oval # 1. Use E.MiLac #001 White Lotus to sketch a bow. LED+CCFL lamp — 30 sec, UV lamp — 2 min. Use EMPASTA White Decor to double. LED+CCFL lamp — 2 min, UV — 2 min. Mix EMPASTA White Decor and EMPASTA Black Tar, and touch up the outline. LED+CCFL lamp — 2 min, UV lamp — 2 min.
4. Glue the Charmicon Jewelry #1. Cover with E.MiLac Top Gel Tackless. LED+CCFL lamp – 2 min, UV lamp – 2 min.
5. Use EMPASTA White Decor to double the bow. Powder with the Dust #024. LED+CCFL lamp — 2 min, UV lamp — 2 min. Clean the excess using a brush. 
6. LED+CCFL lamp — 2 min, UV lamp — 2 min.
7. Use Gemty Gel Turquoise to fill in the cells on the Charmicon sticker. LED+CCFL lamp— 2 min, UV lamp — 3-4 min.
8. Use Gemty Gel Pearl to form the beads. LED+CCFL lamp — 2 min, UV lamp— 3-4 min.
9. Cover the beads and lunula with TEXTONE Gold, and air dry. 
10. Apply E.MiLac Top Gel Tackless over the TEXTONE. LED+CCFL lamp — 2 min, UV lamp— 3-4 min.

Luxurious manicure in blue and silver.
↓ ↓ ↓ Full description↓ ↓ ↓
1. Prepare the nail plate. Cover with the E.MiLac BASE GEL in 1–2 layers. LED+CCFL lamp — 30 sec, UV lamp — 2 min.
2. Perform a coating with E.MiLac #001 White Lotus. LED+CCFL lamp — 30 sec, UV lamp — 2 min. 
3. Cover with the E.MiLac Slider Top Gel. LED+CCFL lamp — 30 sec, UV lamp — 2 min.
4. Cut out the design from the Naildress Slider Design Japanese Chrysanthemum, douse it for a few seconds, remove from the paper base and glue. Smooth. Apply ULTRABOND a better dissolving of the slider’s residues.
5. Perform a coating with E.MiLac #070 Dark Denim. LED+CCFL lamp — 30 sec, UV lamp — 2 min.
6. Glue the Charmicon stickers "Jewelry #1" Apply the Slider Top Gel. CCFL/LED lamp 30-40 sec, UV lamp – 2 min.
7. Cover with the E.MiLac Top Gel Tackless. LED+CCFL lamp – 2 min, UV lamp – 2 min
8. Using EMPASTA Openwork Silver, draw the pattern. LED+CCFL lamp — 2 min, UV lamp — 3-4 min.
9. Using Gemty Gel Sapphire, form stone. LED (45 W) or LED+CCFL lamp – 2-3 min
10. Using Gemty Gel Perl, form dots. LED (45 W) or LED+CCFL lamp – 2-3 min
11. Cover the dots with the TEXTONE "Silver" and air dry. Apply the E.MiLac Top Gel Tackless. LED+CCFL lamp — 2 min, UV lamp — 3-4 min.

↓ ↓ ↓Full description↓ ↓ ↓
1. Prepare the nail plate. Cover with the E.MiLac BASE GEL in 1–2 layers. LED+CCFL lamp — 30 sec, UV lamp — 2 min.
2. Apply the E.MiLac #030 Black Gloss in two layers with the intermediate polymerization. LED+CCFL lamp — 30 sec, UV lamp — 2 min.
3. Cover with the E.MiLac Slider Top Gel. LED+CCFL lamp — 30 sec, UV lamp — 2 min.
4. Cut out the design from the Nailcrust Pattern Sliders Petals #30 Knitting Patterns, douse it for a few seconds, remove from the paper base, glue and smooth. For a better adhesion purpose, allow the slider to dry a little bit for 15-30 sec in any lamp. Apply ULTRABOND across the area for a better dissolving of the slider’s residues and remove them from the nail cuticles, lateral ridges and nail end using a nail stick. File the sides and nail end. Apply ULTRABOND on the entire nail surface for a better adhesion purpose and air dry for.
Continuing in comments!
#emiroshnichenko_videomk
Delete Commentemiroshnichenko5. Cover with the E.MiLac Slider Top Gel. LED+CCFL lamp — 30 sec, UV lamp — 2 min. Apply the E.MiLac Top Gel Tackless. LED+CCFL lamp — 2 min, UV lamp — 3-4 min. Degrease additionally.
6. Mix the gel paint Black Tulip and GLOSSEMI White Platinum and fill in the details inside the sliders. LED/CCFL lamp – 30 sec, UV lamp – 2 min.
7. Imprint the glossy foil “Silver”. Cover with the E.MiLac Top Gel Tackless. LED+CCFL lamp — 2 min, UV lamp — 3-4 min.

Готовим ноготки к коррекции, убираем длину, блеск, цвет, зачищаем границу.
Если отслоек нет - базу оставляем, в моем случае не было ;-)
Затем
1. Наносим Nail Prep Aid, грунтуем ULTRABOND. Сушим 1-2 мин. на воздухе.
2. Покрываем E.MiLac BASE GEL. LED+CCFL – 30 сек., UV – 2 мин.
Важно не просто помазать базой гель-лак и капнуть в серединку, важно смоделировать базой гель-лак, как будто вы делаете укрепление гелем
Выстраиваем:
☝толщину торцов 0,7-1мм, .
☝боковых линий 0,5-0,7мм, .
☝толщину стресса, апекс, .
☝все как при наращивании гелевых ногтей.

Если работать гель-лаком как гелем, моделировать, а не просто покрывать с выравниванием, то:
-  у клиентов будет намного меньше проблем между коррекциями☺️
- все хотят ходить с ногтями подольше, лояльность растет 
- у вас стабильная запись и стабильный доход

1. Prepare the nail plate. Cover with the E.MiLac BASE GEL in 1–2 layers. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
2. Perform the coating with E.MiLac #091 Cruise. Allow it to dry for 1–2 min using LED or  LED+CCFL lamp only. Apply the E.MiLac BASE GEL.
LED+CCFL lamp – 30 sec, UV lamp – 2 min
3. Cut out the element of the Nailcrust Pattern Slider Reptile, douse it for a few seconds, remove from the paper base, glue and smooth. For a better adhesion purpose, allow the slider to dry a little bit for 15-30 sec in any lamp. Apply ULTRABOND across the area for a better dissolving of the slider’s residues and remove them from the cuticles, lateral ridges and the free edge using a nail stick. File the sides and the nail end. Apply ULTRABOND on a whole nail surface for a better adhesion purpose and air dry.
4. Apply the E.MiLac SLIDER TOP GEL . LED+CCFL lamp – 30 sec, UV lamp – 2 min. Glue the Charmicon stickers Chain #3.
Apply the E.MiLac TOP GEL TACKLESS. LED+CCFL lamp – 30
sec, UV lamp – 2 min. Degrease.
5. Step by step with an intermediate polymerization, draw the reptile texture using EMPASTA Cruise. LED+CCFL lamp – 2 min, 
UV lamp – 2 min.
6. Place the rhinestones on the E.MiLac BASE GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Fix the using E.MiLac TOP GEL TACKLESS. LED+CCFL lamp – 2 min, UV lamp – 3-4 min.

1. Prepare the nail plate. Cover with the E.MiLac BASE GEL in 1–2 layers. LED+CCFL lamp — 30 sec, UV lamp — 2 min.
2. Using the E.MiLac #076 Potter's Clay, perform the coating. LED+CCFL lamp — 30 sec, UV lamp — 2 min. Cover with the E.MiLac BASE GEL. LED+CCFL lamp — 30 sec, UV lamp — 2 min.
13. Cut out the element of the Nailcrust #15 Black, douse it for a few seconds, remove from the paper base, glue and smooth. Allow the slider to dry a little bit during 15-30 sec using any lamp for a better adhesion purpose. Apply ULTRABOND across the area for a better dissolving of the slider’s residues, and remove them from the nail cuticle and lateral ridges using a nail stick. File the sides. Apply ULTRABOND for a better adhesion purpose on the entire nail surface and air dry for a few seconds.
4. Using E.MiLac #030 Black Gloss, draw lunulae. LED+CCFL lamp — 30 sec, UV lamp — 2 min.
5. Cover with E.MiLac Slider Top Gel. LED+CCFL lamp — 30 sec, UV lamp — 2 min. Glue the Charmicon stickers Jewelry Silver #4. Apply the E.MiLac TOP GEL. LED+CCFL lamp — 30 sec, UV lamp – 2 min. Degrease.
6. Using Gemty Gel Turquoise, form the stones on the jewelry. LED (45W) or LED+CCFL lamp — 2-3 min. Place the dots along the lunula and under the Charmicon, using EMPASTA Openwork Silver. LED+CCFL lamp — 30 sec, UV lamp — 1 min. Place the rhinestones in the centre on the E.MiLac BASE GEL. LED+CCFL lamp — 30 sec, UV lamp — 2 min. Fix the using E.MiLac TOP GEL TACKLESS. LED+CCFL lamp — 30 sec, UV lamp — 2 min.

↓ ↓ ↓Description ↓ ↓ ↓
1. Using E.MiLac #125 Neutral Gray, perform a coating. LED+CCFL lamp — 30 sec, UV lamp — 2 min.
2. Cover with the E.MiLac Top Gel Tackless. LED+CCFL lamp — 2 min, UV lamp — 2 min.
3. Cut out the element of the Naildress Slider Design Knitted Manicure, douse it for a few seconds, remove from the paper base and glue onto two nails in the nail cuticle area. Smooth. Apply ULTRABOND for a better dissolving of the slider's residues. 
4. Apply the Slider Top Gel. CCFL/LED lamp — 30-40 sec, UV lamp – 2 min.
The index finger-nail on the left hand.
5. Glue the Charmicon sticker Jewelry Silver #4. Apply the E.MiLac Top Gel Tackless. LED+CCFL lamp — 2 min, UV lamp — 2 min.
6. Fill in the Charmicon sticker using the Gemty Gel "Obsidian". LED+CCFL lamp — 2 min, UV lamp — 2 min.
7. Glue the Charmicon stickers Locks. Apply the E.MiLac Top Gel Tackless. LED+CCFL lamp — 2 min, UV lamp — 2 min.
8. Using EMPASTA French Gray, fill in the Charmicon stickers. LED+CCFL lamp — 2 min, UV lamp — 2 min.
On both hands.
9. Place the nail studs and rhinestones on the E.MiLac Sculpt-maxi — 30 sec.
10. Fix the rhinestones and nail studs with the E.MiLac Top Gel Tackless — 2 min.

↓ ↓ ↓Step-by-step master class on nails correction using gel by Vera Miroshnichenko↓ ↓ ↓
Prepare the nails for correction and strengthening:
❤Using the corn-shaped carbide rotary file, reduce the length and remove the color off
❤Using the corn-shaped ceramic rotary file, condition the border between the gel and nail, remove the mirco detachments
❤Using the drop-shaped diamond-coated rotary file, condition the nail cuticle, and remove the pterygium. 
❤Using the white nail file 100/180 shape the nail form, narrow the free edge for sealing purpose.
...
Perform the correction:
1. Apply the Nail Prep Aid, apply the priming coat using ULTRABOND. Allow it to air dry for 1-2 min.
2. Repair the index finger-nail using Fiberglass. Apply the Super Bond Gel, apply the Fiberglass in the stress zone, saturate the top, apply a second thin layer of the Super Bond Gel.
3. Seal using the Natural Composite Gel – for preventing detachments on the free-edge, and level out any nail deformations.
4. Model using Soft Pink Gel. Lay it out to ensure a minimum of filing.
5. Clear the natural nails from inside, remove any irregularities if resulted from sealing, file the top, and polish. 
6. Apply Cuticle Remover, push the nail cuticle back using a nail stick, wipe out moving the wipe upwards, perform the trim manicure. Remove the pterygium’s residues using cuticle nippers.
7. Coat with the gel paint or gel polish, optionally, and create a design.
8. Use the top coat. Use the Brilliant finish gel for the paint, and the E.MiLac Top Gel or E.MiLac Top Gel Tackless for the gel polish.

Order https://emischool.com/catalog/#top_geli_i_zashchitnye_geli

↓ ↓ ↓Description ↓ ↓ ↓
1. Prepare the nail plate. Cover with the E.MiLac BASE GEL in 1–2 layers. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
2. Perform the coating, using E.MiLac #029 Cabernet Bordeaux. LED+CCFL lamp — 30 sec, UV lamp — 2 min. Apply a thin layer of the Slider Top Gel. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
3. Cut out the element of the Nailcrust Pattern Sliders Flower Garden #28, douse it for a few seconds, remove from the paper base, glue and smooth. For a better adhesion purpose, allow the slider to dry a little bit for 15-30 sec in any lamp.

1. Prepare the nail plate. Cover with the E.MiLac BASE GEL in 1–2 layers. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
2. Perform the first layer of the coating, using the E.MiLac #131 Emerald Valley, without applying the magnet. LED+CCFL lamp – 1 min, UV lamp – 2 min. 
3. Glue the Charmicon stickers Lunula #31 and Lunula #25 onto the color’s dispersive film. 
4. Apply a few E.MiLac #131 Emerald Valley. Using the Brush Linear #5/0, fill in the elements in between the Charmicon. Apply the magnet. Perform this nail design step by step with an intermediate polymerization. LED+CCFL lamp – 1 min, UV lamp – 2 min.
5. Apply the E.MiLac TOP TACKLESS GEL. LED+CCFL lamp – 2 min, UV lamp – 2 min.
6. Place the nail studs on the E.MiLac SCULPT-MAXI BASE GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Fix them using E.MiLac TOP GEL TACKLESS. LED+CCFL lamp – 30 sec, UV lamp – 2 min.

↓ ↓ ↓Description ↓ ↓ ↓

1. Prepare the nail plate. Cover with the E.MiLac BASE GEL in 1–2 layers. LED+CCFL lamp – 30 sec, UV lamp – 2 min.

2. Apply the first layer of the coat using E.MiLac #133 Polar Star, without applying the magnet. LED+CCFL lamp – 1 min, UV lamp – 2 min. Apply the first layer, use the magnet to get a holographic effect. LED+CCFL lamp – 1 min, UV lamp – 2 min. Apply a thin layer of the Slider Top Gel. LED+CCFL lamp – 30 sec, UV lamp – 2 min.

3. Cut out the element “Reptile #2”, douse it for a few seconds, remove from the paper base, glue and smooth. For a better adhesion purpose, allow it to dry a little bit for 15-30 sec using any lamp. Apply ULTRABOND across the area to dissolve the slider’s residues, and remove them from the nail cuticle and lateral ridges using a nail stick. File the sides. Apply ULTRABOND on the whole nail surface for a better adhesion purpose, and allow it to air dry for a few seconds.

4. Cover with the E.MiLac Slider Top Gel. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Apply E.MiLac TOP Tackless GEL. LED+CCFL lamp – 2 min, UV lamp – 2 min.

5. Create a reptile texture using the gel “Liquid Stones”. LED/CCFL lamp – 1 min, UV lamp – 2 min. Degrease with Eurocleanser Lux.







Second master-class.

1. Prepare the nail plate. Cover with the E.MiLac BASE GEL in 1–2 layers. LED+CCFL lamp – 30 sec, UV lamp – 2 min.

2. Apply the first layer of the coat using E.MiLac #130 Moon Mist, without applying the magnet. LED+CCFL lamp – 1 min, UV lamp – 2 min. Apply the second layer, use the magnet to get a holographic effect. LED+CCFL lamp – 1 min, UV lamp – 2 min. Apply a thin layer of the Slider Top Gel. LED+CCFL lamp – 30 sec, UV lamp – 2 min.

3. Cut out the element “Fleur”, douse it for a few seconds, remove from the paper base, glue and smooth. For a better adhesion purpose, allow it to dry a little bit for 15-30 sec using any lamp. Apply ULTRABOND across the area to dissolve the slider’s residues, and remove them from the nail cuticle and lateral ridges using a nail stick. File the sides. Apply ULTRABOND on the whole nail surface for a better adhesion purpose, and allow it to air dry for a few seconds.

4. Cover with the Slider Top Gel. LED+CCFL lamp – 30 sec, UV lamp – 2 min.

5. Put a few E.MiLac #130 Moon Mist on the color palette. Using the Brush Linear #5/0, fill in the elements on the slider. Apply the magnet. LED+CCFL lamp – 1 min, UV lamp – 2 min.

6. Fix the coat using E.MiLac Top Gel Tackless. LED+CCFL lamp — 2 min, UV lamp — 2 min.

1. Prepare the nail plate. Cover with the E.MiLac BASE GEL in 1–2 layers. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
2. Perform the coat using the E.MiLac #062 Amber Honey. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Apply E.MiLac BASE GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
3. Scissor out the element of the Nailcrust Pattern Sliders #15 Black, douse it for a few seconds, remove from the paper base, glue and smooth. For a better adhesion, allow the slider to dry a little bit for 15-30 sec in any lamp. Apply ULTRABOND across the area for a better dissolving of the slider’s residues and remove them from the nail cuticles and lateral ridges using a nail stick. File the sides. Apply ULTRABOND on a whole nail surface for a better adhesion purpose and air dry for a few seconds.
4. Cover with the E.MiLac Slider Top Gel. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Apply E.MiLac TOP GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Degrease.
5. Using EMPASTA Black Tar, draw a triangle lunula. LED+CCFL lamp – 2 min, UV lamp – 2 min. Add EMPASTA Black Tar into the Liquid Stones gel, place the rhinestones, slightly pressing them to sink. LED+CCFL lamp – 2 min, UV lamp – 2 min.
6. Using EMPASTA Openwork Silver, double the lunula, outlining its contours. LED+CCFL lamp – 2 min, UV lamp – 2 min.

1. Prepare the nail plate. Cover with the E.MiLac BASE GEL in 1–2 layers. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
2. Perform a coat using E.MiLac #078 Dark Wine. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Apply E.MiLac Slider TOP GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
3. Scissor out the element of the Nailcrust Pattern Sliders #2 Black, douse it for a few seconds, remove from the paper base, glue and smooth. For a better adhesion purpose, allow the slider to dry a little bit for 15-30 sec in any lamp. Apply ULTRABOND across the area for a better dissolving of the slider’s residues and remove them from the nail cuticles, lateral ridges and the area of the free-edge using a nail stick. File the sides and the nail ends. Apply ULTRABOND on a whole nail surface for a better adhesion and air dry for a few seconds.
4. Cover with the E.MiLac Slider TOP GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Apply E.MiLac TOP GEL Tackless. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Degrease.
5. Step-by-step with an intermediate polymerization, draw a pattern over the Nailcrust slider using EMPASTA Black Tar and Openwork Silver. LED+CCFL lamp – 2 min, UV lamp – 2 min.
6. Add EMPASTA Black Tar into the Liquid Stones gel, place the rhinestones, slightly pressing them to sink. LED+CCFL lamp – 2 min, UV lamp – 2 min. Degrease the stone.
7. Using your finger-pad, tone the relief with EMPASTA White Rafinad. LED+CCFL lamp – 30 sec, UV lamp – 2 min.

1. Prepare a nail plate. Cover with the E.MiLac BASE GEL in 1–2 layers. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
2. Create a coat using E.MiLac #087 Streetstyle. Allow it to dry for 1–2 min using only LED or LED+CCFL lamp. Apply E.MiLac Slider TOP GEL LED+CCFL lamp – 30 sec, UV lamp – 2 min.
3. Cut out the element of the Nailcrust slider #15 White, douse it for a few seconds, remove from the paper base, glue and smooth. For a better adhesion purpose, allow the slider to dry for 15-30 sec using any lamp. Apply ULTRABOND across the area for a better dissolving of the slider’s residues and remove them from the nail cuticles, lateral ridges and the area of the free edge of the nail using a nail stick. File the sides and the nail end. Apply ULTRABOND on a whole nail surface for a better adhesion and air dry for a few seconds.
4. Cover with the E.MiLac Slider TOP GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Glue the Charmicon Stickers Jewelry #1. Apply the E.MiLac TOP GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Degrease.
5. Place the rhinestones in the centre of the Charmicon sticker over the E.MiLac BASE GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Fix them using E.MiLac TOP GEL TACKLESS. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
6. Using Gemty Gel Pearl, form the stones on the rose’s petals. LED (45 W) or LED+CCFL lamp – 2-3 min.
7. Below and above the Charmicon sticker, place the rhinestones on the E.MiLac BASE GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Fix them using E.MiLac TOP GEL TACKLESS. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
8. Place the dots using EMPASTA White Rafinad along the lunula and on the Charmicon sticker. LED+CCFL lamp – 2min, UV lamp – 2 min.

1. Prepare the nail plate. Cover with the E.MiLac BASE GEL in 1–2 layers. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
2. Perform the coat using the E.MiLac #001 White Lotus and #030 Black Gloss. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Apply the E.MiLac Slider TOP GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
3. Cut out the element of the Nailcrust slider #15 Black, douse it for a few seconds, remove from the paper base, glue and smooth. Allow the slider to dry for 15-30 sec using any lamp for a better adhesion purpose. Apply ULTRABOND across the area for a better dissolving of the slider residues and remove them from the nail cuticles, lateral ridges and area of the free-edge using a nail stick. File the sides and the nail ends. Apply ULTRABOND on a whole nail surface for a better adhesion and air dry for a few seconds.
4. Cover with the E.MiLac Slider TOP GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. 
5. Glue the Charmicon stickers Chain #2. Apply the E.MiLac TOP GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Degrease.
6. Place the nail studs on the E.MiLac BASE GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Fix them using the E.MiLac TOP GEL TACKLESS. LED+CCFL lamp – 30 sec, UV lamp – 2 min.

1. Prepare the nail plate. Cover with the E.MiLac BASE GEL in 1–2 layers. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
2. Perform the coat using the E.MiLac #001 White Lotus and #030 Black Gloss. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Apply the E.MiLac Slider TOP GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
3. Cut out the element of the Nailcrust slider #15 Black, douse it for a few seconds, remove from the paper base, glue and smooth. Allow the slider to dry for 15-30 sec using any lamp for a better adhesion purpose. Apply ULTRABOND across the area for a better dissolving of the slider residues and remove them from the nail cuticles, lateral ridges and area of the free-edge using a nail stick. File the sides and the nail ends. Apply ULTRABOND on a whole nail surface for a better adhesion and air dry for a few seconds.
4. Cover with the E.MiLac Slider TOP GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. 
5. Glue the Charmicon stickers Chain #2. Apply the E.MiLac TOP GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Degrease.
6. Place the nail studs on the E.MiLac BASE GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Fix them using the E.MiLac TOP GEL TACKLESS. LED+CCFL lamp – 30 sec, UV lamp – 2 min.

1. Prepare the nail plate. Cover with the E.MiLac BASE GEL in 1–2 layers. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
2. Perform the coat using the gel paint “Nude Look”. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Apply the E.MiLac BASE GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
3. Cut out the element of the Nailcrust slider #15 Black, douse it for a few seconds, remove from the paper base, glue and smooth. Allow the slider to dry for 15-30 sec using any lamp for a better adhesion purpose. Apply ULTRABOND across the area for better dissolving of the slider residues and remove them from the nail cuticles and the free-edge using a nail stick. File the nail end. Apply ULTRABOND on a whole nail surface for a better adhesion and air dry for a few seconds.
4. Cover with the E.MiLac Slider TOP GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Apply the E.MiLac TOP GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Degrease.
5. Draw the stripes along the Nailcrust slider using EMPASTA White Rafinad. LED+CCFL lamp – 2 min, UV lamp – 2 min.
6.  EMPASTA «Морозная Арктика» закрашиваем лепестки цветочков. LED+CCFL – 2 мин., UV – 2 мин.
7. Сажаем стразы на E.MiLac BASE GEL. LED+CCFL – 30 сек., UV – 2 мин. Фиксируем их с помощью E.MiLac TOP GEL TACKLESS. LED+CCFL – 30 сек., UV – 2 мин.

1. Glue the Charmicon Stickers Lunula #25 onto the dispersive film of the gel-polish’s base. 
2. Perform the coat using the E.MiLac #126 French Gray stopping short of the lunula. Using the Brush Perfect Stroke #0, bring the coat close to the lunula. LED/CCFL lamp – 1 min, UV lamp – 2 min. Double the layer and allow it to dry again using the LED/CCFL lamp – 1 min, UV lamp – 2 min. 
3. Apply the E.MiLac Slider Top Gel in a thin layer. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
4. Cut out the Nailcrust Pattern Sliders Petals #29, douse it for a few seconds, remove from the paper base, glue and smooth. For a better adhesion, allow the slider to dry a little bit for 15-30 sec in any lamp. Apply ULTRABOND across the area for a better dissolving of the slider’s residues and remove them from the nail cuticles, lateral ridges and the area of the free edge of the nail using a nail stick. File the sides and the nail end. Apply ULTRABOND on a whole nail surface for a better adhesion and air dry.
5. Glue the Charmicon Stickers Chain #8. Fix it using E.MiLac Slider Top Gel. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
6. Cover with E.MiLac Matt top Gel along the borders spacing from the Charmicon. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Degrease with Eurocleanser Lux.
7. Fill in the pattern using EMPASTA French Gray and Brush Linear #5/0. Make it with an intermediate polymerization using LED+CCFL lamp – 2 min, UV lamp – 2 min. 
8. Place the nail studs on the E.MiLac BASE GEL. LED+CCFL lamp — 30 sec, UV lamp — 2 min. Fix them using E.MiLac TOP GEL TACKLESS. LED+CCFL lamp — 30 sec, UV lamp — 2 min.

1. Prepare the nail plate. Cover with the E.MiLac BASE GEL in 1–2 layers. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
2. Perform the coat using the E.MiLac #085 Ice Lemon. Allow it to dry for 1–2 min using only LED or LED+CCFL lamp. Apply the E.MiLac
BASE GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min.
3. Cut out the element of the Nailcrust Pattern Sliders Reptile, douse for a few seconds, remove from the paper base, glue and smooth. For a better adhesion purpose, allow the slider to dry a little bit for 15-30 sec in any lamp. Apply ULTRABOND across the area for a better dissolving of the slider’s residues and remove them from the nail cuticles, lateral ridges and the area of the free edge of the nail using a nail stick. File the sides and the nail end. Apply ULTRABOND on a whole nail surface for a better adhesion and air dry.
4. Apply the E.MiLac Slider TOP GEL . LED+CCFL lamp – 30 sec, UV lamp – 2 min.
Glue the Charmicon Stickers Jewelry Gold #5. Apply the E.MiLac TOP GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Degrease.
5. Step by step with an intermediate polymerization, draw reptile texture using EMPASTA Ice Lemon. LED+CCFL lamp – 2 min, UV lamp – 2 min.
6. Fill in the flower’s petals on the Charmicon with EMPASTA Streetstyle. LED+CCFL lamp – 2 min, UV lamp – 2 min.
7. Place the rhinestones on the E.MiLac BASE GEL. LED+CCFL lamp – 30 sec, UV lamp – 2 min. Fix them using E.MiLac TOP GEL TACKLESS. LED+CCFL lamp – 30 sec, UV lamp – 2 min.

EMPASTA: https://emischool.com/catalog/#empasta
E.MiLac: https://emischool.com/catalog/#e_milac
Nailcrust: https://emischool.com/catalog/#Decoration

Aligning the jump-hill shape using the base for gel polish
Ekaterina Miroshnichenko shows how to perform the nail correction step by step to yourself. How to ensure a safe removal of the gel polish? 
How to align the jump-hill nails using the rubber base? How to prevent burning during polymerization? The secrets by the real nail artist.

Lesson on the combined manicure, recovery and extension of nails using E.MiLac Sculpt-Maxi Base Gel – the rubber base gel for the gel polish

Master class by Ekaterina Miroshnichenko on aligning and strengthening of the nail plate. ↓ ↓ ↓More info↓ ↓ ↓ The thick base gel E.MiLac Sculpt-Maxi Base Gel used for gel polish allows you to model an ideal shape of the nails

1. Подготавливаем ногтевую пластину. Наносим E.MiLac BASE GEL. LED+CCFL — 30 сек., UV — 2 мин.
2. Выполняем покрытие E.MiLac 001 «Белый лотос». LED+CCFL — 30 сек., UV — 2 мин. Наносим Slider Top Gel  LED+CCFL — 2 мин., UV — 2 мин.
3. Вырезаем элемент слайдера, опускаем в воду на несколько секунд, снимаем с бумажной основы и клеим на дисперсионную пленку E.MiLac BASE GEL. Разглаживаем. Чтобы лучше растворить остатки слайдера, наносим ULTRABOND по периметру и убираем остатки деревянной палочкой с кутикулы и боковых валиков. Для большего сцепления наносим ULTRABOND на всю поверхность ногтя, сушим на воздухе. Обрабатываем пилкой бока.
4. Покрываем E.MiLac Slider Top Gel  LED+CCFL — 2 мин., UV —2 мин. Приклеиваем Charmicon «Украшение No 5». Наносим E.MiLac TOP GEL Tackless. LED+CCFL — 2 мин, UV — 2 мин.
5. EMPASTA «Павлин» и «Белый рафинад» заполняем Charmicon. LED+CCFL — 2 мин., UV — 2 мин. Дизайн можно выполнять пошагово с промежуточной полимеризацией.
6. Gemty Gel «Бирюза» выборочно добавляем объем. LED+CCFL — 2 мин, UV — 2 мин.
7. Сажаем стразы на E.MiLac BASE GEL. LED+CCFL — 30 сек., UV — 2 мин. Фиксируем их с помощью E.MiLac TOP GEL TACKLESS. LED+CCFL — 30 сек., UV — 2 мин.

For those who already misses the summer 🌞 The ladies going on vacations during the mellow season will like it 😉
The full version of this master class is available on YouTube https://www.youtube.com/user/emischoolcom/videos
1. Prepare the nail plate. Apply the E.MiLac BASE GEL. LED+CCFL — 30 sec, UV — 2 min.
2. Perform the coat using the E.MiLac #001 White Lotus. LED+CCFL — 30 sec, UV — 2 min. Apply the Slider Top Gel  LED+CCFL — 2 min, UV — 2 min.
3. Cut out the element of the slider, douse it for a few seconds, remove from the paper base and glue to the E.MiLac BASE GEL. Smooth. Apply ULTRABOND across the area for better dissolving of the slider residues and remove the residues from the nail cuticles and lateral ridges using a nail stick. Apply ULTRABOND on a whole nail surface for better adhesion and air dry. File the sides. 
 4. Cover with the E.MiLac Slider Top Gel  LED+CCFL — 2 min, UV —2 min. Glue the Charmicon Stickers Jewelry # 5. Apply the E.MiLac TOP GEL Tackless. LED+CCFL — 2 min, UV — 2 min.
5. Fill in the Charmicon using EMPASTA Peacock and White Rafinad. LED+CCFL — 2 min, UV — 2 min. This nail design can be performed step by step with an intermediate polymerization.
6. Randomly, add the volume using Gemty Gel Turquoise. LED+CCFL — 2 min, UV — 2 min.
7. Place the rhinestones on the E.MiLac BASE GEL. LED+CCFL — 30 sec, UV — 2 min. Fix them using E.MiLac TOP GEL TACKLESS. LED+CCFL — 30 sec, UV — 2 min.

What manicure will be in fashion in autumn 2017?
The fashionistas will definitely like the laconic designs created in the shades from the new collection "Total Gray".
↓ ↓ ↓ ↓ ↓ ↓More info↓ ↓ ↓ ↓ ↓ ↓
To place your order for the E.MiLac Total Gray, please head over to http://emischool.com/catalog/#collection_total_gray

1. Prepare the nail plate. Apply the E.MiLac BASE GEL. LED+CCFL lamp — 30 sec, UV lamp — 2 min.
2. Perform the coat using the gel paint Open Air. LED+CCFL lamp — 30 sec, UV lamp — 2 min. Apply the E.MiLac SLIDER TOP GEL. LED+CCFL lamp — 2 min, UV lamp — 1 min.
3. Cut the element of the Charmicon Stickers Frame #1 in half, glue and smooth carefully.
4. Cover with the E.MiLac SLIDER TOP GEL. LED+CCFL lamp — 2 min, UV lamp — 1 min.
5. Draw the floral texture using EMPASTA Open Air. LED+CCFL lamp — 2 min, UV lamp — 2 min.
6. Place the rhinestones on the E.MiLac BASE GEL. LED+CCFL lamp — 30 sec, UV lamp — 2 min. Fix them using the E.MiLac TOP GEL TACKLESS. LED+CCFL lamp — 30 sec, UV lamp — 2 min.